Construction Hoist SC200/200 FIC-12 Fully Intelligent Control
passenger and material Rack and Pinion Lift
Features
* Apply high efficiency and energy-saving gear reducer
*Apply non-eccentric rollers. No need to adjust rollers after
installation. That means faster installs for any Exterior
Restoration or Construction project and no mistakes caused by
installation.
*Integrated cage roof. Cage roof is made by a full plate of tread
plate cut by Laser and welded by robots one time to
complete, with high strength and no leakage.
* Unique flap door for loading/unloading ramp
* Additional 'C' door at cage side for convenient
loading/unloading.
* Interlocked roof hatch
* Drop test facility with remote pendant
* Be equipped with with Fully Intelligent System, with functions including floor
selection, floor calling and automatic cage landing/stop, automatic
open/close cage doors and floor doors, fault detect, display and
alarm, personnel biologic recognition and permissions, etc.
* Easy access to electrical panels for maintenance
* centrifugal braking safety device
* Heavy duty galvanized mast sections
Technical Data
| Item & Article No. | SC200/200 FIC-12 |
| Number of Cages | 2 Cages |
| Payload Capacity | 2,000 KG each Cage |
| Lifting Speed | 0–60 meter/minute, fully loaded |
| Max. Lifting Height | 250 m / 450 m * |
| Cage Size (internal) | 3.2(Length)*1.5(Width)*2.35(Height) Meter per Cage |
| Cage Doors | Modularized Entrance Door and Discharge Door, and Third Door at the
long side of cage |
| Engine Power | 3*15 KW each Cage; 2*3*15 KW Totally. |
| Motor Control | Frequency Control (FC) |
| Invertor Power (KW) | 1*55 KW each Cage; 2*55 KW Totally. |
| Gearbox | Helical Gearbox |
| Safety Device Type | Centrifugal Brake |
| Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
| Mast Section | Square Column 650*650*1508 mm with Bolted Rack |
| Rack Module | 8 |
| * Increased lifting height on request. 250 m with step-up
transformer only. 400 m with step-up/step-down transformer. |
